|
|
|
|
Topglory© MULTI DONE 188 A – 188 D (not flammable, no conductible, for live use ) Want to seriously
protect and clean your motherboards
from oxidization ? We introduce a real innovation to clean and
protect electronic circuits and motherboards. Topglory© is all about curing the
increasingly widespread of oxidization problem. -DESCRIPTION OF THE PRODUCTS- Topglory© multi-done 188 A: cleaning for electronic cards
Characteristics: 1. Density: 1.2±0.05; pH: 6.8 2. Very volatile, quick to get dry, do not leave any
residue; 3. Non-corrosive, it does not have any chemical reaction
with any materials in case of boiling 4. Without aflash point, not combustible 5. Highly insulated (insulation resistance 4 x 1012 , non
conductive. Use: It is mainly used in the ultra-sonic cleaning and maintenance of
circuits and various production lines of electronic products of program-control
exchange, mobile phones, mobile communications equipment, broadcasting and TV,
audio-visual equipment , film and domestic appliances, etc… Instructions: Spray at 15-20 cm on the surface to be cleaned by pressing spray button, or use an extension guide pipe for the smallest parts.
Topglory© multi-done 188 D: remove oxidisation and protect …, guard for motherboards
The electronic instruments which were treated with this product do not
need more maintenance during several months! Performance and Characteristics: 1. Drain water, protects from moisture, corrosion, rust. Clean, lubricates and attenuates the noise of
operation of the electrical appliance. 2. Without a flash point, not combustible. 3. Prevent the electric breakdowns and allows to restore
(to remake to function) the appliances fallen into water. 4. Prevent the electric escapes and the electric arcs. Applications : Suitable for use in transformers, motors, generators, communication
equipment, junctions of electric appliances, relays, breakers, switch
controllers, electronic products, alarm system, starters, welding guns, dies,
drill rods, soldering irons, cutters, conveyors, cranes etc… Features and characteristics : 1)
Drainage, moisture prevention, corrosion prevention, rust prevention,
cleaning, lubrication, noise
elimination etc… 2)
Prevention of electrical failures, and restoration of water intruded
electric-equipment. 3)
Prevention of electric leakage and arcs … METHODS OF APPLICATION : 1)
Normally directly
spray this product onto the places that need cleaning and protection, and no
wiping is required. 2)
The procedure of
restoration of water-instructed electric appliance : a)
Use water to
flush dirt , sand, and saline matter off the electrical appliance and then blow
it dry b)
According to the
appliance, use 188 A to perform deep-layer cleaning so as to remove all oils
strains, carbon strains and some moisture. c)
Immerse the
water-intruded appliance with this product 188 D and then shake it. If it is
difficult to the entire appliance,
spray it with the solution until it is fully saturated. The appliance can be
put to trial use after it is dried un open air.
Since the wide range of applications for the product cannot come under our control, this information is given for guidance and does not represent an undertaking on our behalf. It is imperative to carry out preliminary test before using the product. The manufacturer can in no way be held liable for any improper use of the product .
They are conditioned
with a non-flammable gas of propulsion and have as a reference:
Topglory© 188A: equivalent of the 188B,
for LIVE
use Topglory© 188D: equivalent of the 188
E, for LIVE
use
|
